Xen Logs
From OptionC
Examples of "successful" boot dmesgs, for Xen, domO, and domU. A wiki isn't the cleanest place for these, but until we come up with something better, here they are. It is primarily useful if your system isn't booting, and you want to know what happens next...
| Table of contents |
[edit]
Xen 2.0.6/2.6.11
These samples are from 2.0.6 (the stable release as of this writing), with domO and domU running 2.6.11. There is only one ethernet card, and a very basic network configuration.
The hardware is an IBM x235, dual Xeon processors (2.4 ghz) with 2 GB of RAM and a ServeRaid 5i SCSI adapter. As such, this was a custom kernel compilation, but there were only two deviations from the plain vanilla kernels:
CONFIG_SCSI_IPS=y CONFIG_HIGHMEM4G=y
[edit]
Xen Hypervisor
Output of "xm dmesg"
ERROR: cannot use unconfigured serial port COM1
__ __ ____ ___ __
\ \/ /___ _ __ |___ \ / _ \ / /_
\ // _ \ '_ \ __) || | | | '_ \
/ \ __/ | | | / __/ | |_| | (_) |
/_/\_\___|_| |_| |_____(_)___(_)___/
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 2.0.6 (root@(none)) (gcc version 3.3.3) Mon May 30 18:35:44 CDT 2005
Latest ChangeSet: information unavailable
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009c000 (usable)
(XEN) 000000000009c000 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000007fff8740 (usable)
(XEN) 000000007fff8740 - 0000000080000000 (ACPI data)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) System RAM: 2047MB (2096720kB)
(XEN) Xen heap: 10MB (10732kB)
(XEN) CPU0: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
(XEN) CPU#0: Physical ID: 0, Logical ID: 0
(XEN) CPU caps: 3febfbff 00000000 00000000 00000000
(XEN) found SMP MP-table at 0009c140
(XEN) ACPI: RSDP (v000 IBM ) @ 0x000fdfc0
(XEN) ACPI: RSDT (v001 IBM SERONYXP 0x00001000 IBM 0x45444f43) @ 0x7fffff80
(XEN) ACPI: FADT (v001 IBM SERONYXP 0x00001000 IBM 0x45444f43) @ 0x7fffff00
(XEN) ACPI: MADT (v001 IBM SERONYXP 0x00001000 IBM 0x45444f43) @ 0x7ffffe40
(XEN) ACPI: ASF! (v016 IBM SERONYXP 0x00000001 IBM 0x45444f43) @ 0x7ffffd80
(XEN) ACPI: DSDT (v001 IBM SERGEODE 0x00001000 MSFT 0x0100000b) @ 0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
(XEN) Processor #6 Pentium 4(tm) XEON(tm) APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 Pentium 4(tm) XEON(tm) APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
(XEN) Processor #7 Pentium 4(tm) XEON(tm) APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
(XEN) Using ACPI for processor (LAPIC) configuration information
(XEN) Intel MultiProcessor Specification v1.4
(XEN) Virtual Wire compatibility mode.
(XEN) OEM ID: IBM ENSW Product ID: GRANIT SMP APIC at: 0xFEE00000
(XEN) I/O APIC #14 Version 17 at 0xFEC00000.
(XEN) I/O APIC #13 Version 17 at 0xFEC01000.
(XEN) I/O APIC #12 Version 17 at 0xFEC02000.
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
(XEN) Processors: 4
(XEN) Using scheduler: Borrowed Virtual Time (bvt)
(XEN) Initializing CPU#0
(XEN) Detected 2394.855 MHz processor.
(XEN) CPU0: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
(XEN) CPU#0: Physical ID: 0, Logical ID: 0
(XEN) CPU caps: 3febfbff 00000000 00000000 00000000
(XEN) CPU0 booted
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) masked ExtINT on CPU#1
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) CPU1: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
(XEN) CPU#1: Physical ID: 0, Logical ID: 1
(XEN) CPU caps: 3febfbff 00000000 00000000 00000000
(XEN) CPU1 has booted.
(XEN) Booting processor 2/6 eip 90000
(XEN) Initializing CPU#2
(XEN) masked ExtINT on CPU#2
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) CPU2: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
(XEN) CPU#2: Physical ID: 3, Logical ID: 0
(XEN) CPU caps: 3febfbff 00000000 00000000 00000000
(XEN) CPU2 has booted.
(XEN) Booting processor 3/7 eip 90000
(XEN) Initializing CPU#3
(XEN) masked ExtINT on CPU#3
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) CPU3: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
(XEN) CPU#3: Physical ID: 3, Logical ID: 1
(XEN) CPU caps: 3febfbff 00000000 00000000 00000000
(XEN) CPU3 has booted.
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) Setting 14 in the phys_id_present_map
(XEN) ...changing IO-APIC physical APIC ID to 14 ... ok.
(XEN) Setting 13 in the phys_id_present_map
(XEN) ...changing IO-APIC physical APIC ID to 13 ... ok.
(XEN) Setting 12 in the phys_id_present_map
(XEN) ...changing IO-APIC physical APIC ID to 12 ... ok.
(XEN) init IO_APIC IRQs
(XEN) ..TIMER: vector=0x41 pin1=2 pin2=-1
(XEN) Using local APIC timer interrupts.
(XEN) Calibrating APIC timer for CPU0...
(XEN) ..... CPU speed is 2394.7615 MHz.
(XEN) ..... Bus speed is 99.7816 MHz.
(XEN) ..... bus_scale = 0x0000662F
(XEN) checking TSC synchronization across CPUs: passed.
(XEN) Time init:
(XEN) .... System Time: 11459673ns
(XEN) .... cpu_freq: 00000000:8EBE9900
(XEN) .... scale: 00000001:AB954B15
(XEN) .... Wall Clock: 1118105270s 120000us
(XEN) PCI: PCI BIOS revision 2.10 entry at 0xfd7bc, last bus=10
(XEN) PCI: Using configuration type 1
(XEN) PCI: Probing PCI hardware
(XEN) PCI: Probing PCI hardware (bus 00)
(XEN) PCI: Ignoring BAR0-3 of IDE controller 00:0f.1
(XEN) PCI: Discovered peer bus 02
(XEN) PCI: Discovered peer bus 05
(XEN) PCI->APIC IRQ transform: (B0,I9,P0) -> 26
(XEN) PCI->APIC IRQ transform: (B0,I15,P0) -> 11
(XEN) PCI->APIC IRQ transform: (B2,I8,P0) -> 29
(XEN) PCI->APIC IRQ transform: (B5,I3,P0) -> 22
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=2.0,VIRT_BASE=0xC0000000,LOADER=generic,PT_MODE_WRITABLE'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Kernel image: 00c00000->010495ec
(XEN) Initrd image: 00000000->00000000
(XEN) Dom0 alloc.: 01400000->11400400
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c058a1c4
(XEN) Init. ramdisk: c058b000->c058b000
(XEN) Phys-Mach map: c058b000->c05cb000
(XEN) Page tables: c05cb000->c05ce000
(XEN) Start info: c05ce000->c05cf000
(XEN) Boot stack: c05cf000->c05d0000
(XEN) TOTAL: c0000000->c0800000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Scrubbing DOM0 RAM: ...done.
(XEN) Scrubbing Free RAM: .....................done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen).
[edit]
dom0 (LFS 5.1 - more or less)
"(There are 7 domUs set to start automatically on boot.)"
[edit]
output of "dmesg"
Linux version 2.6.11.10-xen0 (root@lfs-milo-playground.option-c.home) (gcc version 3.3.3) #1 Mon May 30 18:47:04 CDT 2005
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010000000 (usable)
0MB HIGHMEM available.
256MB LOWMEM available.
On node 0 totalpages: 65536
DMA zone: 65536 pages, LIFO batch:16
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
IRQ lockup detection disabled
Allocating PCI resources starting at 10000000 (gap: 10000000:f0000000)
Built 1 zonelists
Kernel command line: root=/dev/sda1 ro hda=ide-scsi console=tty0
ide_setup: hda=ide-scsi
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Xen reported: 2394.855 MHz processor
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
vmalloc area: d0800000-fb7fe000, maxmem 34000000
Memory: 254208k/262144k available (3019k kernel code, 7668k reserved, 1019k data, 324k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4784.12 BogoMIPS (lpj=23920640)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: 3febd3f1 00000000 00000000 00000080 00000000 00000000 00000000
CPU: Intel(R) XEON(TM) CPU 2.40GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
NET: Registered protocol family 16
PCI: Using configuration type Xen
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
PCI: Probing PCI hardware (bus 02)
PCI: Probing PCI hardware (bus 05)
PCI: Probing PCI hardware
IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
Initializing Cryptographic API
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
HP CISS Driver (v 2.6.4)
Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
Copyright (c) 1999-2004 Intel Corporation.
pcnet32.c:v1.30i 06.28.2004 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
tg3.c:v3.23 (February 15, 2005)
PCI: Obtained IRQ 29 for device 0000:02:08.0
eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:02:55:07:17:41
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
Xen virtual console successfully installed as ttyS
Event-channel device installed.
Initialising Xen netif backend
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1
SvrWks CSB5: chipset revision 147
SvrWks CSB5: not 100% native mode: will probe irqs later
SvrWks CSB5: simplex device: DMA forced
ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA
SvrWks CSB5: simplex device: DMA forced
ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: LG CD-ROM CRD-8484B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
Red Hat/Adaptec aacraid driver (1.1.2-lk2 May 30 2005)
PCI: Obtained IRQ 22 for device 0000:05:03.0
scsi0 : IBM PCI ServeRAID 7.10.18 Build 731 <ServeRAID 5i>
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Processor ANSI SCSI revision: 02
Vendor: IBM Model: 32P0042a S320 1 Rev: 1
Type: Processor ANSI SCSI revision: 02
3ware Storage Controller device driver for Linux v1.26.02.000.
libata version 1.10 loaded.
SCSI device sda: 142192640 512-byte hdwr sectors (72803 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 142192640 512-byte hdwr sectors (72803 MB)
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Fusion MPT base driver 3.01.18
Copyright (c) 1999-2004 LSI Logic Corporation
Fusion MPT SCSI Host driver 3.01.18
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Obtained IRQ 11 for device 0000:00:0f.2
ohci_hcd 0000:00:0f.2: OHCI Host Controller
ohci_hcd 0000:00:0f.2: irq 11, pci mem 0xfebfe000
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 1236.800 MB/sec
raid5: using function: pIII_sse (1236.800 MB/sec)
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
Bridge firewalling registered
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 324k freed
kjournald starting. Commit interval 5 seconds
Adding 1008084k swap on /dev/sda2. Priority:-1 extents:1
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-14, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
device eth0 entered promiscuous mode
xen-br0: port 1(eth0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 1(eth0) entering forwarding state
device vif1.0 entered promiscuous mode
xen-br0: port 2(vif1.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 2(vif1.0) entering forwarding state
device vif2.0 entered promiscuous mode
xen-br0: port 3(vif2.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 3(vif2.0) entering forwarding state
device vif3.0 entered promiscuous mode
xen-br0: port 4(vif3.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 4(vif3.0) entering forwarding state
device vif4.0 entered promiscuous mode
xen-br0: port 5(vif4.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 5(vif4.0) entering forwarding state
device vif5.0 entered promiscuous mode
xen-br0: port 6(vif5.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 6(vif5.0) entering forwarding state
device vif6.0 entered promiscuous mode
xen-br0: port 7(vif6.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 7(vif6.0) entering forwarding state
device vif7.0 entered promiscuous mode
xen-br0: port 8(vif7.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 8(vif7.0) entering forwarding state
device vif8.0 entered promiscuous mode
xen-br0: port 9(vif8.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 9(vif8.0) entering forwarding state
device vif9.0 entered promiscuous mode
xen-br0: port 10(vif9.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 10(vif9.0) entering forwarding state
device vif10.0 entered promiscuous mode
xen-br0: port 11(vif10.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 11(vif10.0) entering forwarding state
device vif11.0 entered promiscuous mode
xen-br0: port 12(vif11.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 12(vif11.0) entering forwarding state
[edit]
output of "ifconfig -a"
eth0 Link encap:Ethernet HWaddr 00:02:55:07:17:41
inet addr:10.77.77.200 Bcast:10.77.77.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:171094 errors:0 dropped:0 overruns:0 frame:0
TX packets:97205 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:85744903 (81.7 Mb) TX bytes:58654190 (55.9 Mb)
Interrupt:29
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:24795 errors:0 dropped:0 overruns:0 frame:0
TX packets:24795 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2019870 (1.9 Mb) TX bytes:2019870 (1.9 Mb)
vif1.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:898 errors:0 dropped:0 overruns:0 frame:0
TX packets:90531 errors:0 dropped:59 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:203494 (198.7 Kb) TX bytes:27814848 (26.5 Mb)
vif2.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:31340 errors:0 dropped:0 overruns:0 frame:0
TX packets:119104 errors:0 dropped:33 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:11322894 (10.7 Mb) TX bytes:39021359 (37.2 Mb)
vif3.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:33378 errors:0 dropped:0 overruns:0 frame:0
TX packets:113514 errors:0 dropped:9 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:34439386 (32.8 Mb) TX bytes:55715674 (53.1 Mb)
vif4.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:437 errors:0 dropped:0 overruns:0 frame:0
TX packets:86555 errors:0 dropped:49 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:42758 (41.7 Kb) TX bytes:26569850 (25.3 Mb)
vif5.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:647 errors:0 dropped:0 overruns:0 frame:0
TX packets:86642 errors:0 dropped:86 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:60618 (59.1 Kb) TX bytes:26580767 (25.3 Mb)
vif6.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:327 errors:0 dropped:0 overruns:0 frame:0
TX packets:86054 errors:0 dropped:25 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:28699 (28.0 Kb) TX bytes:26496049 (25.2 Mb)
vif7.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:85755 errors:0 dropped:49 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2876 (2.8 Kb) TX bytes:26455803 (25.2 Mb)
vif8.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:10231 errors:0 dropped:0 overruns:0 frame:0
TX packets:95113 errors:0 dropped:4187 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:10261042 (9.7 Mb) TX bytes:37221360 (35.4 Mb)
vif9.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:320 errors:0 dropped:0 overruns:0 frame:0
TX packets:85285 errors:0 dropped:118 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:22842 (22.3 Kb) TX bytes:26393694 (25.1 Mb)
vif10.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:110 errors:0 dropped:0 overruns:0 frame:0
TX packets:84991 errors:0 dropped:43 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:33702 (32.9 Kb) TX bytes:26372508 (25.1 Mb)
vif11.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2293 errors:0 dropped:0 overruns:0 frame:0
TX packets:13229 errors:0 dropped:105 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:672408 (656.6 Kb) TX bytes:3707373 (3.5 Mb)
xen-br0 Link encap:Ethernet HWaddr 00:02:55:07:17:41
inet addr:10.77.77.200 Bcast:10.77.77.255 Mask:255.255.255.255
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:105273 errors:0 dropped:0 overruns:0 frame:0
TX packets:22090 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:27809847 (26.5 Mb) TX bytes:2002260 (1.9 Mb)
[edit]
domU (Debian Sarge)
[edit]
output of "dmesg" from within domU
Linux version 2.6.11.10-xenU (root@lfs-milo-playground.option-c.home) (gcc version 3.3.3) #1 Mon May 30 18:51:38 CDT 2005 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000020000000 (usable) 512MB LOWMEM available. On node 0 totalpages: 131072 DMA zone: 131072 pages, LIFO batch:16 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 DMI not present. IRQ lockup detection disabled Allocating PCI resources starting at 20000000 (gap: 20000000:e0000000) Built 1 zonelists Kernel command line: ip=:1.2.3.4::::eth0:dhcp root=/dev/sda1 ro Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Xen reported: 2394.855 MHz processor. Using tsc for high-res timesource Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) vmalloc area: e0800000-fbff9000, maxmem 34000000 Memory: 515712k/524288k available (1631k kernel code, 8292k reserved, 439k data, 112k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 4757.91 BogoMIPS (lpj=23789568) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 3febc3f1 00000000 00000000 00000080 00000000 00000000 00000000 CPU: Intel(R) XEON(TM) CPU 2.40GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... disabled NET: Registered protocol family 16 xen_mem: Initialising balloon driver. Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Xen virtual console successfully installed as tty Event-channel device installed. xen_blk: Initialising virtual block device driver xen_net: Initialising virtual ethernet driver. NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 IP-Config: Incomplete network configuration information. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 112k freed kjournald starting. Commit interval 5 seconds Adding 786424k swap on /dev/sda2. Priority:-1 extents:1 EXT3 FS on sda1, internal journal
[edit]
output of "ifconfig -a" from within domU
eth0 Link encap:Ethernet HWaddr AA:BB:CC:00:02:13
inet addr:10.77.77.123 Bcast:10.77.77.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:86082 errors:0 dropped:0 overruns:0 frame:0
TX packets:329 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:26511167 (25.2 MiB) TX bytes:28824 (28.1 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:560 (560.0 b) TX bytes:560 (560.0 b)
